Hey guys so im really sorry its been a while since we've posted a tip but i hope you like this one!
What you’ll need:
1. Scissors
2. Liquid stitch (I'm sure a hot glue gun would work too)
3. A rotary cutter (or just use the scissors)
4. A piece of cardboard
5. A shirt you are willing to cut
Step 1: Using your scissors, cut the bottom hem off of your shirt (you’ll need the material later)
Step 2: With the cardboard inside of the shirt, cut slits in the fabric with the rotary cutter or scissors. It doesn’t matter how far apart you make your cuts, as long as they are evenly spaced. you could use the hem of the shirt to help guide the cuts so they were all the same width.
Step 3: Using the extra material, cut 2-3 inch long strips (make sure to cut off the thread).
Step 4: Pinch the fabric in the middle, creating the “bow” shape.
Step 5: Wrap one of your fabric strips around the area that you pinched, and apply the liquid stitch or hot glue. Make sure that the glued section ends up in the back, so you have a smooth looking bow on the outside.
Step 6: Once glued, your bow should now look like the pic above :)
Step 7: Repeat steps 4-5 for all of the other bows until you reach the bottom.
Step 8 (optional): If you want, you can also add another bow on the very top. First, cut off the edge of the hem around the neck with a pair of scissors. Cut however much you want off, depending on how deep you want your shirt to go in the front and back. Repeat steps 4-5 for the bow and voila! This wasn't done to the one in the pic but you could try it!
And there you have it! I love this DIY because it’s quite simple to do (seeing as there’s no sewing involved), and it ends up looking adorable! JUST BE CAREFUL IF YOU USE A ROTARY CUTTER! put something STURDY underneath your shirt so that it doesnt cut through to the front of the shirt!
Hope you enjoyed! Please comment below with any wuestions, comments, or pics of how your shirt turned out!
<3333
Ashlyn
@fleuryfan29
What you’ll need:
1. Scissors
2. Liquid stitch (I'm sure a hot glue gun would work too)
3. A rotary cutter (or just use the scissors)
4. A piece of cardboard
5. A shirt you are willing to cut
Step 1: Using your scissors, cut the bottom hem off of your shirt (you’ll need the material later)
Step 2: With the cardboard inside of the shirt, cut slits in the fabric with the rotary cutter or scissors. It doesn’t matter how far apart you make your cuts, as long as they are evenly spaced. you could use the hem of the shirt to help guide the cuts so they were all the same width.
Step 3: Using the extra material, cut 2-3 inch long strips (make sure to cut off the thread).
Step 4: Pinch the fabric in the middle, creating the “bow” shape.
Step 5: Wrap one of your fabric strips around the area that you pinched, and apply the liquid stitch or hot glue. Make sure that the glued section ends up in the back, so you have a smooth looking bow on the outside.
Step 6: Once glued, your bow should now look like the pic above :)
Step 7: Repeat steps 4-5 for all of the other bows until you reach the bottom.
Step 8 (optional): If you want, you can also add another bow on the very top. First, cut off the edge of the hem around the neck with a pair of scissors. Cut however much you want off, depending on how deep you want your shirt to go in the front and back. Repeat steps 4-5 for the bow and voila! This wasn't done to the one in the pic but you could try it!
And there you have it! I love this DIY because it’s quite simple to do (seeing as there’s no sewing involved), and it ends up looking adorable! JUST BE CAREFUL IF YOU USE A ROTARY CUTTER! put something STURDY underneath your shirt so that it doesnt cut through to the front of the shirt!
Hope you enjoyed! Please comment below with any wuestions, comments, or pics of how your shirt turned out!
<3333
Ashlyn
@fleuryfan29
Comment 2 likes





